Rubber Lined Pipe Clamp — Heavy-Duty Vibration & Corrosion-Resistant Clamp

Shanghai Lianyu Industrial Co., Ltd. presents a premium Rubber Lined Pipe Clamp engineered for secure, long-life support of industrial pipelines where vibration control, electrical isolation and corrosion protection are required. Suitable for HVAC, petrochemical, power plants, offshore, marine, water treatment, and process piping.

Key Benefits

• Vibration & Noise Reduction: Elastomer lining (EPDM / NBR / Neoprene options) dampens vibration and reduces structure-borne noise.

• Corrosion Protection: Rubber barrier prevents metal-to-metal contact and protects coated pipes and insulation.

• Electrical Isolation: Non-conductive lining isolates metallic pipes from supporting steelwork to prevent galvanic corrosion.

• Pipe Surface Protection: Lining prevents abrasion and damage to protective coatings and insulation.

• Wide Temperature & Chemical Compatibility: Lining material options for oil, chemical, steam and potable water applications.

• Easy Installation & Adjustment: Standard bolt clamps for fast assembly and secure fixation.

• Long Service Life: Robust steel body with protective finish for harsh industrial environments.

Typical Construction & Materials

• Clamp Body: Carbon steel (Q235 / S235JR) or stainless steel (SS304 / SS316) band and saddles.

• Lining (Elastomer): EPDM (weather/ozone/heat), NBR (oil/gas resistant), Neoprene (chemical & weather resistance), or Fluoroelastomer (Viton®) for aggressive chemicals.

• Bolts & Nuts: Grade 4.8 / 8.8 carbon steel (zinc plated) or stainless steel A2/A4.

• Finish: Hot-dip galvanizing (HDG), electro-galvanized, powder coat, or natural stainless steel.

• Optional Accessories: Insulation pads, cushioning washers, T-bolts, saddle plates, earthing straps.

Standard Sizes & Dimensions (Typical)

Rubber-lined pipe clamps are supplied to match pipe OD. Samples below are common ranges — custom sizes available on request.

Custom fabrication: clamps for any OD, special saddle widths, multi-bolt designs, and heavy-duty double-band clamps for large pipelines.

Performance & Operating Limits

• Temperature Range: Depends on lining: EPDM (−40°C to +120°C), NBR (−30°C to +100°C), Neoprene (−30°C to +110°C), FKM/Viton (−20°C to +200°C). Confirm material selection for service conditions.

• Pressure Rating: Clamp selection is independent of fluid pressure; choose clamp style and number of supports per pipe span to meet load and span requirements.

• Chemical Resistance: Select lining elastomer based on media compatibility (we provide chemical compatibility charts on request).

Applications

• Petrochemical & refinery piping

• Offshore & marine pipelines (cooling water, ballast lines)

• Power plants (steam, condensate, feedwater)

• HVAC, chilled water and refrigerant lines

• Water & wastewater treatment plants

• Food & beverage (with FDA-grade lining options)

• Pharmaceutical and high-purity systems (PTFE-lined or compatible elastomers)

• Firefighting mains and sprinkler systems

Installation Guidance

1. Select correct clamp diameter matching pipe OD (including insulation thickness if present).

2. Verify lining integrity before installation — no tears or foreign debris.

3. Place clamp saddle under pipe; fit bolt and tighten to recommended torque to avoid compressing lining excessively.

4. For insulated pipe, install appropriate thermal isolation pads between clamp and insulation.

5. Use earthing/grounding strap where required to maintain electrical continuity.

6. For seismic or high-dynamic applications, use multi-point or double-band clamps and pair with engineered hangers/anchors.

Standards & Compliance

Manufactured to commonly accepted industrial standards; configurable to meet project requirements:

• Material & coating to ISO / ASTM / EN references.

• Manufacturing QA under ISO 9001 processes (factory QA on request).

• Dimensional and mechanical testing available per customer specification.
  (We supply standard test reports and material certificates on request.)

Ordering Information

When requesting a quote, please provide:

• Pipe outer diameter (OD) or nominal pipe size (DN)

• Media / operating temperature and pressure (for lining selection)

• Required quantity and delivery schedule

• Preferred clamp body material & finish (HDG / SS304 / SS316)

• Any special requirements (insulation, double-band, seismic rating)

Why Choose Shanghai Lianyu Industrial Rubber-Lined Clamps

• Factory manufacturing with full quality control and material traceability.

• Multiple elastomer options to suit chemical and thermal conditions.

• Fast custom fabrication for non-standard pipe sizes.

• Protective finishes (HDG / stainless) for harsh and marine environments.

• Technical support for hanger spacing, thermal expansion and seismic applications.

• Global export experience and project supply capability.